Español
العربية
Francés
Русский
Português
Deutsch
Italiano
Türk dili
Język polski
Nederlandse taal
Svenska
Čeština
suomi
Slovenský jazyk
2 Ton Trench Machine Mini Excavator
Compact Design: Can access and operate in tight spaces that larger excavators cannot.
Maneuverability: Tracks provide stability and the ability to traverse various terrains.
A 2-Ton Construction Engineering Crawler Excavator is an indispensable tool for small to medium construction projects, offering a combination of power, precision, and versatility. Its compact size and advanced features make it a cost-effective solution for contractors, landscapers, and engineers.
| Packaging | |
| Packaging | Wooden box |
| Net weight of product(kg) | 1400kg |
| Gross weight with wooden case (kg) Wooden case weight 150kg | 1550kg |
| Running weight (kg) (net weight + load) | 1480kg |
| Product Information | |
| Product net weight (kg) | 1400kg |
| Maximum load (kg) | 120 |
| Color | Orange + Black |
| Maximum traveling speed (km/h) | 2.5-3 |
| Rated slewing speed (rpm) | 8-14 |
| Fuel tank capacity (L) | 19 |
| Hydraulic oil tank capacity (L) | 16.5 |
| Fuel consumption (L/h) | 1L/h |
| Side Swing Angle | Yes |
| Chassis telescopic function | No such function |
| Sunshade way | Four-legged shed |
| Engine | |
| Engine Model | Kubota D722 |
| Engine power (hp) | 13.8hp |
| Rated speed (rpm) | 2600 |
| Engine type | Water-cooled four-stroke |
| Displacement (CC) | 719 |
| Engine Cylinder Form | Inline three-cylinder |
| Engine Bore (mm) | 67 |
| Engine Stroke (mm) | 68 |
| Engine oil capacity (L) | 3.8 |
| Engine net weight (kg) | 63 |
| Rated torque (N.m) | 45@2600rpm |
| Fuel type | Diesel |
| Oil type | Refer to engine manual |
| Cooling type | Water-cooled |
| Emission standard | EPA |
Weight and Dimensions:
Operating Weight: Approximately 2 tons (4,400 lbs).
Width: Typically between 1.3 to 1.5 meters (4.3 to 5 feet), allowing access to narrow spaces.
Height: Low-profile design under 2.5 meters (8.2 feet) for easy transport and operation in confined spaces.
| Control system | |
| Controls | Hydraulic pilot type on both sides |
| Chronographs | Yes |
| Voltmeter | Yes |
| Battery Voltage (V) | 12 |
| Battery Capacity (AH) | 45 |
| Battery Size (mm) | 238*130*200+20 (column height 20) |
| Battery Weight (kg) | 12 |
| Battery Positive Terminal Diameter (mm) | 19 |
| Battery Negative Terminal Diameter (mm) | 17 |
| Maximum starting current (A) | 380 |
| Main Pump | |
| Main Pump Model | |
| Main pump type | Duplex Gear Pumps |
| Rated pressure of main pump (Mpa) | 18 |
| Maximum pressure of main pump (Mpa) | 25 |
| Nominal flow rate of main pump (ml/r) | 10+3 |
| Hydraulic oil type | 46#Anti-wear hydraulic oil |
| Main pump flow rate (L/min) | 39L/min@3000rpm |
| multicircuit valve | |
| Model | 8-Link Liquid Control |
| Rated pressure of main pump (Mpa) | 17.5 |
Digging Performance:
Digging Depth: 2.3 to 2.8 meters (7.5 to 9.2 feet), sufficient for most utility trenches.
Bucket Width: Options ranging from 200 to 450 mm (8 to 18 inches), ideal for trench-specific work.
Bucket Capacity: Around 0.03 to 0.1 cubic meters (0.04 to 0.13 cubic yards), optimized for precise material removal.
| walking system | |
| Model | |
| Type | Cycloid motor |
| Gear | First gear |
| Function of oil unloading | None |
| Track material | Rubber |
| Track width (mm) | 180 |
| Pitch of track (mm) | 72 |
| Number of track sections | 41 |
| Number of supporting wheels | 2 |
| Airframe Configuration | |
| Roof form | Four-legged shed |
| Cabin heat insulation foam | Upper engine |
| Boom hydraulic pipe routing | Internal alignment |
| Boom cylinder mounting position | Big arm upper side inverted |
| Fuel filling position | Right side leg |
| Hydraulic oil filling position | Right side leaning leg |
| Cabin door opening method | Upper side seat forward |
| Chassis hook | Without hook |
| Throttle valve | With throttle |
| Seat armrests | without armrest |
| Seat belts | with |
| Anti-slip feet | with |
| Rubber skid cover for operating rod | Digging lever |
| Material of hydraulic pipe of big arm | Hose |
| Hydraulic Oil Heat Dissipation | with hydraulic oil cooling |
| Engine cooling | with water cooling |
Engine and Power:
Engine Type: Diesel-powered, providing high torque for digging tasks.
Horsepower: Typically ranges from 20 to 30 HP, balancing power and fuel efficiency.
Emission Standards: Compliance with Tier 4/Stage V for reduced environmental impact.
| Adaptability of aids | |
| Attachment link shaft diameter (mm) | 25 |
| Width of small arm end (mm) | 90 |
| Specification of reserved hydraulic connector | M16 male thread |
| Number of reserved hydraulic joints | 2 |
| Thumb Clamp Adaptation Form | Upper Single Hole Style |
| Outer width of mounting on the thumb clamp of small arm (mm) | 47 |
| Thumb clamp upper mounting hole opening distance (mm) | 27 |
| Small arm thumb clamp lower mounting hole width (mm) | 90 |
| Diameter of small arm thumb clamp hole (mm) | 25.5 |
| Vehicle Specifications | |
| Maximum length (mm) | 4325 |
| Bulldozer width (mm) | 1100 |
| Overall width (mm) (both sides of chassis hook) | 1100 |
| Overall track width (mm) | 1000 |
| Overall height cab top (mm) | 2272 |
| Track distance (mm) | 920 |
| Track length to ground (mm) | 1050 |
| Track Length (mm) | 1545 |
| Standard (single) track width (mm) | 180 |
| Swivel platform ground clearance (mm) | 375 |
| Traveling Minimum Ground Clearance (mm) | 98 |
| Minimum turning radius (mm) | 1711 |
| Standard bucket volume (m3) | 0.025 |
| Standard bucket width (mm) | 400 |
Hydraulic System:
Delivers precise control over the boom, arm, and bucket movements.
Supports multiple attachments such as trenching buckets, augers, and hydraulic breakers.
| working size | |
| Maximum digging force of bucket (KN) | 14.5 |
| Maximum load (kg) | 200 |
| Maximum digging depth (mm) | 2100 |
| Maximum vertical digging depth (mm) | 1850 |
| Maximum digging height (mm) | 2580 |
| Maximum unloading height (mm) | 1637 |
| Maximum digging radius (mm) | 3160 |
| Climbing capacity (°) | 30 |
| Maximum height of bulldozer (mm) | 310 |
| Maximum depth of bulldozer (mm) | 270 |
FAQ
Q1. What is the advantage about your company?
A1.Our company has professional team and professional production line.
Q2. Why should l choose your products?
A2.Our products are high quality and low price.
