Español
العربية
Francés
Русский
Português
Deutsch
Italiano
Türk dili
Język polski
Nederlandse taal
Svenska
Čeština
suomi
Slovenský jazyk
1 ton Mini Excavator Digging Machine
Compact and Portable: Easy to transport on standard trailers, without the need for special permits or heavy-duty transport.
Low Operating Costs: Lower fuel consumption and fewer maintenance requirements make them cost-effective for small-scale jobs.
Versatility: Can be used with a variety of attachments, making them adaptable to many different types of tasks.
Minimal Site Disruption: The smaller size and tracks reduce the impact on surrounding environments and work areas.
1 ton Mini Excavator Digging Machine Applications:
Residential Construction: Digging trenches for pipes, foundation work, or landscaping.
Landscaping: Moving soil, planting trees, and grading surfaces.
Agriculture: Digging small irrigation channels, clearing land, or planting.
Utility Installation: Installing water, gas, and electrical lines in tight spaces.
Small Demolition Jobs: Breaking up small concrete or brick structures.
Parks and Golf Courses: Leveling land, creating ponds, or clearing debris.
| Product Information | |
| Net weight (kg) | 850 |
| Gross weight with wooden box (kg) | 950 |
| Running weight (kg) | 970 |
| Maximum load (kg) | 120 |
| Color | Orange + Black |
| Maximum traveling speed (km/h) | 3 |
| Slewing speed (rpm) | 11 |
| Fuel tank capacity (L) | 6.6 |
| Hydraulic oil tank capacity (L) | 12.7 |
| Fuel consumption (L/h) | 1L/h |
| Side Swing Angle | No function |
| Chassis telescopic function | Without this function |
| Awning way | Four-legged shed |
Maneuverability:
Zero Tail Swing (optional): Some models are designed with a "zero tail swing," meaning the counterweight doesn't extend beyond the width of the tracks. This is useful in tight spaces where over-swing could cause accidents or damage.
Easy Operation: The small size and responsive controls make it easy to operate even in confined or hard-to-reach spaces.
| Engine | |
| Engine Model | Paragon Single Cylinder 25T2 |
| Engine power (hp) | 13.5hp |
| Rated speed (rpm) | 3060 |
| Engine type | Air-cooled four-stroke, OHV |
| Displacement (CC) | 420 |
| Engine Cylinder Form | Single-cylinder, cast iron cylinder liner |
| Engine Bore (mm) | 90 |
| Engine Stroke (mm) | 66 |
| Engine oil capacity (L) | 1.1 |
| Engine net weight (kg) | 31 |
| Rated torque (N.m) | 28.5@3060RPM |
| Fuel type | Gasoline 95# and above |
| Oil type | 10-30 (W) |
| Cooling type | Air-cooled |
| Emission standard | EPA |
| Control system | |
| Controls | Front Mechanical |
| Chronographs | Yes |
| Voltmeter | No |
| Battery Voltage (V) | 12 |
| Battery Capacity (AH) | 45 |
| Battery Size (mm) | 224*117*175 |
| Battery Weight (kg) | 12 |
| Maximum starting current (A) | 380 |
| main pump | |
| Main Pump Model | PGP5106GLP |
| Main pump type | Single Gear Pumps |
| Rated pressure of main pump (Mpa) | 18 |
| Maximum pressure of main pump (Mpa) | 25 |
| Nominal flow rate of main pump (ml/r) | 6 |
| Hydraulic oil type | 46#Anti-wear hydraulic oil |
| Main pump flow rate (L/min) | 18L/min |
| Airframe Configuration | |
| Roof form | four-legged shed |
| Cabin heat insulation foam | / |
| Boom hydraulic pipe routing | Outer alignment |
| Boom cylinder mounting position | Lower side of the big arm positively fitted |
| Fuel filling position | Under Seat |
| Hydraulic oil filling position | Seat Left |
| Cabin door opening method | Flip the seat forward |
| Chassis hook | / |
| Throttle valve | Without throttle, throttle mounting holes reserved |
| Seat armrests | With armrests |
| Seat belts | with |
| Anti-slip feet | with |
| Rubber skid cover for operating rod | Digging lever |
| Material of hydraulic pipe of big arm | Hose |
| Hydraulic Oil Heat Dissipation | Without hydraulic oil radiator |
| Engine cooling | Air Cooled |
Stability: The low center of gravity and wide stance of crawler excavators provide stability, making them safer to operate on uneven ground.
Low Ground Pressure: The tracks distribute the machine's weight over a larger area, reducing ground pressure and minimizing damage to soft surfaces.
All-Terrain Capability: Crawler excavators can operate in diverse environments, including rugged terrains and challenging weather conditions.
| Adaptability of aids | |
| Attachment link shaft diameter (mm) | 25 |
| Width of small arm end (mm) | 90 |
| Specification of reserved hydraulic connector | M16 male thread |
| Number of reserved hydraulic joints | 2 |
| Thumb Clamp Adaptation Form | Top Single Hole Styles |
| Outer width of mounting on the thumb clamp of small arm (mm) | 47 |
| Thumb clamp upper mounting hole opening distance (mm) | 47 |
| Small arm thumb clamp lower mounting hole width (mm) | 90 |
| Diameter of small arm thumb clamp hole (mm) | 25.5 |
